AIRLESSCO HSS9000 Manuel d'instructions télécharger pdf (Page 16)

Maintenance

16 3A1188B

Packing Replacement Procedures

1. Soak all Leather Packings in oil for 5-10 minutes

before assembly.

2. Place glands and packing on inverted piston in the

following order and orientation.

a. Male gland (10)

b. Alternate blue UHMWPE (6) and leather pack-

ings (1)

c. Female gland (11)

d. Backup washer (12)

e. Piston wiper

NOTE: The special sealing patch on piston valve

threads is good for 4 repackings. Use Loctite

on piston

valve threads after 4 repackings.

3. Insert ball (13) in piston rod (8). If Loctite

is applied

to piston threads, insure that none gets on ball.

4. Install piston valve (14) to piston rod(8). Torque to

55 +/-3 ft-lb (74.57 =/- 4 N-m).

5. Place male gland (9) in cylinder.

6. Alternately stack UHMWPE (6) and leather pack-

ings (1). Note orientation.

7. Place female gland (10) in top of cylinder. Seat

packings.

ti8854b

ti8855b

ti8850a

ti11819b

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 31 32

Pas de commentaire

AIRLESSCO HSS9000 Manuel d'instructions Page 16