AIRLESSCO HSS9000 Manuel d'instructions télécharger pdf (Page 12)

Maintenance

12 3A1188B

• Use only BPR6ES (NGK) or W20EPR-U (NIPPON-

DENSO) plug. Gap plug to 0.028 to 0.031 in (0.7 to

0.8 mm) Use spark plug wrench when installing and

removing plug.

Cleaning a Clogged Tip

1. Follow Pressure Relief Procedure, page 6.

2. Clean the front of the tip frequently (with toothbrush

only) during the day to keep material from building

up and clogging the tip.

3. To clean and clear a tip if it clogs, refer to the sepa-

rate instruction manual received with your gun and

nozzle.

Servicing the Fluid Pump

Fluid Pump Removal

1. Relieve Pressure, page 6.

2. Flush the material you are spraying out of the

machine.

3. Remove the front cover.

4. Remove the suction tube (25) and paint hose (26)

(remove at swivel end).

5. Push retaining ring up (27); push out pin (28).

6. Loosen jam nut (28). Unscrew pump.

• Clogged standard flat tip - clean only after the tip is

removed from the gun. See Pressure Relief

Procedure, page 6





ti2272a

ti2272b

ti2272c

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 31 32

Pas de commentaire

AIRLESSCO HSS9000 Manuel d'instructions Page 12