AIRLESSCO SL1500 Manuel d'instructions télécharger pdf (Page 10)

PRESSURE RELIEF PROCEDURE

5. Re-engage gun safety latch and close

Prime/Pressure Relief Valve.

TO AVOID POSSIBLE SERIOUS BODY INJURY, ALWAYS FOLLOW THIS PROCEDURE WHENEVER THE

SPRAYER IS SHUT OFF, WHEN CHECKING IT, WHEN INSTALLING, CHANGING OR CLEANING TIPS,

WHENEVER YOU STOP SPRAYING, OR WHEN YOU ARE INSTRUCTED TO RELIEVE THE PRESSURE.

IMPORTANT!

1. Engage the gun safety latch. Refer to the separate

instruction manual provided with your gun on its safety

features and how to engage safety latch.

2. Turn the unit off.

3. Disengage the gun safety latch and trigger the gun to

relieve residual uid pressure.

HOLD METAL PART OF THE GUN IN CONTACT WITH

GROUNDED METAL PAIL. USE MINIMUM PRESSURE !

4. Turn Prime/Pressure Relief Valve (PR

Valve) to the open (priming) position to

relieve residual uid pressure.

If the SPRAY TIP OR HOSE IS CLOGGED, follow Step

1 through 5 above. Expect paint splashing into the bucket

while relieving pressure during Step 4.

If you suspect that pressure hasn't been relieved due to

damaged Prime/Pressure Relief Valve or other reason,

engage the gun safety latch and take your unit to an

authorized Airlessco Service Center.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 31 32

Pas de commentaire

AIRLESSCO SL1500 Manuel d'instructions Page 10